Remix of AirTag Cat Collar Clip by @LyndonBlack_332077
5
73
1
654
updated October 4, 2023

Description

PDF

Remix of AirTag Cat Collar Clip by @LyndonBlack_332077. I made some small fixes to make it print a little cleaner, mainly by removing some problematic overhangs.

The 3MF file is for a Prusa MK3S using the “Generic FLEX” profile, but also some custom line widths for optimal printing. Print this model in a flexible filament, preferably with a slightly higher shore hardness number (I used Devil Design TPU). Clean up any dingleberries around the seams and use a flat, thin metal tool to shoehorn the AirTag in. I used a razor blade but really recommend using something non-sharp.

The original file was meant to be put directly on a collar, but instead I fed a velcro cable tie through it so it can be transferred between dog harnesses. This is the most low-profile AirTag holder that I've found so far and it should hold the AirTag very reliably, considering the effort it took to get it in or out, despite the flexible filament.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I made some small fixes to make it print a little cleaner, by removing some problematic overhangs.

License