Lady of the Sea - Hueforge Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Overture Dark Blue…
9
22
0
237
updated October 4, 2023

Description

PDF

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

  • PLA+ Overture Dark Blue Transmission Distance: 1.8
  • PLA META Sunlu Teal Transmission Distance: 5.4
  • PLA CC3D Orange Transmission Distance: 7.4
  • PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

  • Start with Dark Blue
  • At layer #9 (0.8mm) swap to Teal
  • At layer #15 (1.28mm) swap to Orange
  • At layer #27 (2.24mm) swap to White for the rest.
Category: Other

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License