MagSafe stand

I like it now I have a place to put my phone next to my watch and one of the supports failed so it was a little weird, but it’s working thank you

print at 99% scale for a snug fit (edited)

Fits an OAndys charger purchased from Amazon. Printed easily. Used a bit of hot glue to hold everything together. (edited)

An elegant design, seems to work well with an Apple MagSafe pad and iPhone 13. The one thing I would say is that you should print a thin layer height. I printed it at .3mm layer height, but there were some overhang issues on my Mk3s, I think a .2 or .15mm layer height would avoid some of the feathering issues. (edited)

I remixed it to fit a non-Apple magsafe charger: https://makerworld.com/en/models/475634
It came out great - I'm a big fan!
Thank you

Simple and elegant design!
My original MagSafe had a little bit of wiggle in the socket, so I scaled the model 99.5% and the charger fit snugly.

Works with an Aliexpress charger

Great model! Scaled up to 108% to fit a Baseus charger (60.5 mm diameter). Thank you!

It does work, fits nicely - not original magsafe. It's McDodo brand's.

Filament: Devil Design White PETG