Rail clips for cable management

Fits the ~3.2mm remote cable for my Streamlight. If you need a different size please let me know and I will update with more STLs.

3D printing settings

Print them on the side for durability, else the "cable hooks" are likely to break off or the clip itself will break when it is pushed onto the rail.

I used 15% infill, 0.15mm layer height, a 0.4mm nozzle and different brands of PLA. I imagine most settings and materials will work just fine.

No supports necessary, except for "Rail Clip Cable Crossover.stl"

Can be printed in tacticool colours too!