A model inspired by retro scooters, this LED lamp captures the essence of vintage cool. Perfect for scooter enthusiasts, it adds a nostalgic touch to any space.
Using the samelayer method, you'll print the first color/STL as you normally would. Then, for the subsequent colors, simply disable bed leveling in the startup G-code and add a 1 mm Z hop. This nifty trick enables the nozzle to gracefully hop over the colors already printed. Start with the lightest color and finish with black for the best results.
3D PRINTING SETTINGS
PEI sheet
0.2mm layer height
These youtube links/videos are not mine and all credit goes to the creators.
- lamp assembly-materials: https://www.youtube.com/watch?v=yRWmLu6s4ek
- print without ams: https://www.youtube.com/watch?v=Zmqgbs5jFBU&t=863s
- gcode changes needed for printing without ams: https://www.youtube.com/watch?v=3X-4Buq4HS0&t=702s
Disclaimer: Please be aware that this model is best suited for those with 3D printing experience or access to an Automatic Material Switching (AMS) setup, which greatly simplifies the printing process. If you're new to 3D printing, I recommend familiarizing yourself with advanced printing techniques, equipment, and gcode knowledge before attempting this project.
The author marked this model as their own original creation.