Blue Snowball shockmount for original stand

Shockmount for Blue Snowball
7
26
0
416
updated March 20, 2021

Description

PDF

This is a remix of a couple of shockmounts I found on Thingiverse.

My improvement, is that the shockmount can be used on the original Blue Snowball microphone stand.

One M3 screw is needed for mounting the outer ring to the threaded part. And of course, some rubber bands or hair ties to mount the microphone. The inner rings is a tight fit, but it should be that way.

This design isn't prefect. I messed it up somewhere along the way and got the axis twisted a bit. But it should work.

The Snowball is mounted on an Ikea Tertial lamp in the picture, with this thing https://www.thingiverse.com/thing:2657082, but it mounts just as good to the original stand.

I modeled this in Sketchup quite a long time ago. Before learning a proper cad software. Say hello to the good 'ol 24 sided Sketchup circles.

 

Print Settings

Supports might be needed for the threaded part.

Print one of everything, except the inner ring. Print two of those.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License