Chain for Small Ghosts (Print-in-Place)

This is a small print-in-place chain made for the ghost whistle model: https://www.printables.com/model/604285-ghost-whistle

Two different chain lengths are available, filename indicates length in cm when extended. It is possible to make other sizes in the slicer (split to objects and add/remove links as needed). The 36 links file can be printed on a 18 cm MINI build plate, just rotate it diagonally. 

There is also a clip for extending the chain or use as a bracelet/necklace.

Printing tips

Make sure to have good bed adhesion, the links don't have much surface area towards the base. Some things to consider if it comes off the bed while printing:

• Clean the build plate.
• Disable elephant foot compensation.
• Increase first layer extrusion width.
• Adjust Z on the printer.