Prusa Frame Clip and Magnet

I made this little sign to attach to the frame of my Prusa. Great for keeping track of which printer if you have multiple, or just attaching some bling! 

Print the clip as oriented for the best strength. There is a blank remixable plate for magnets 6x2 and 8x3, also a STP file. To make your own follow the sketch in the images. The center of the two magnets just needs to be 40mm apart. 

WARNING: clip may interfere with z calibration. Put clip on right side to minimize problems or remove during z calibration.

Make sure to print my Magic Magnet Tool to keep the polarity right on your magnets.

Compatible with these Barbie and Ken Magnets.

Happy Printing!