Ender 3 V2 Camera Mount

I remixed this from Adeema's camera mount for the Ender 3. That mount worked great but I installed a CR Touch and it was just barely too thick, causing the x axis to grind when trying to home. This one fits in on the side of the case on left side of the x axis and is screwed in tight with an M2 screw, anything 12mm or longer.

I double sided sticky taped my ESP32 cam to the flat end facing the extruder, and it works great.

Requires an M2 x 12 screw to tighten, and some double sided sticky tape

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%

Filament: Overture PLA Matte Red Post-Printing =============

Category: 3D Printer Accessories