TRX4 tray for HobbyWing WP1080

Tray for WP1080 ESC that can be mounted in place of original Traxxas ESC. Also features external switch for power on/off
5
23
1
191
updated April 16, 2024

Description

PDF

So far I only found external switch for original Traxxas ESC. 

Current model accommodates the 1080 ESC and the power button. Also the button can be actioned by a lever protruding between chassis and sliders. Main difference is that lever is actioned from behind to front, minimizing the risk of accidental trigger during run.

Design is optimized to be printed with 0.4 and 0.6 nozzles. 

Position of tray is adjustable to meet your needs.

 

Additional hardware:

  • original screws can be reused for mounting the tray
  • 1 m3x12mm screw needed for mounting the lever on the tray
  • double adhesive tape needed to glue the ESC and button on the tray (provided in ESC box)

 

Print parameters

  • material: PLA, PETG (or any other non flexible)
  • supports: only needed for lever
  • perimeters: at least 3
  • bottom/top: at least 3
  • layer height: 0.2mm
  • infill: whatever you like

Happy printing and happy crawling!

 

I like beer but also need coffee in the morning. Here is the link ;) : https://www.buymeacoffee.com/BogoRin

Tags



Model origin

The author marked this model as their own original creation.

License