310mm version by resizing to 96%
The original was made for bigger version with the same design (320mm instead of 310mm I have)
5
28
0
205
updated October 1, 2023
Description
PDFBottom rescaled (this remix), Top saved with another remix.
If you need to save what you printed (because you didn't know that this is possible), you can save your prints by printing
https://www.printables.com/model/554461-adjusted-for-rosewill-dehydrator
I made it a whole plate for PrusaSlicer on MK3 for convenience and also single STLs.
Already in good printing position, for PETG and textured sheet no brim required (I added some organic supports for W_Sensor for sensor hole, looks slightly better than without.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Resized to 96% compared to original on X and Y axis.
Window for Sensor compensated by negative volume in PrusaSlicer.
