16x2 LCD with D1-Mini case

This is a simple case for a 16x2 LCD with a pocket for a D1-Mini in the back. It has a cutout for the controllers metal-can to prevent overheating.

Assembly

• M2 machine-screws inserted from the front side should self-tap into the posts in the back. If this does not work use longer screws, a washer and a nut on the backside.
• When soldering wires to the controller, you should keep them flat on the back.

Changes

v1 → v2:

• Pockets for screws on the front
• Better pocket for the controller