The display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes.
The base has to be rotated 90 degrees for printing.
No supports needed.
This model is for micro-usb only boards.
If you have a board with both micro-usb and USB-C see this model: https://www.printables.com/model/641974-case-for-esp32-2432s208-sunton-touch-display-usb-c
The author remixed this model.
This model has higher sides to fit an additional screw down base.
This model is for micro-usb only boards.
If you have a board with both micro-usb and USB-C see this model: https://www.printables.com/model/641974-case-for-esp32-2432s208-sunton-touch-display-usb-c