Skullpkin
I wanted to make a Pumpkin and people seem to be enjoying the skull that I made in Sculptris for Halloween, so here is…
In the contest Halloween theme
67
254
10
1119
updated
October 4, 2019
Makes
Comments
Printed this file with a Polyterra two-tone matte PLA from Polymaker.
The black and white filament added a nice and spooky flare.
Printed with 0.4mm nozzle, 0.2 layer height, 3 walls and 5% 3D-honeycomb infill.
Smaller model @100% larger print at 150%.
Very happy with the model and how the print came out. Used a little bit of (manual) tree supports for the overhangs. (edited)
Printed normal size then printed 175%.
Came out brilliantly at 0.28 with 15% lightning infill shaving HOURS off the print. Thanks!!!
I’ve cut a hole in the base to cause a flap to insert a flickering battery candle, as with lightning it’s mostly empty inside.
My wife loves these! Supports needed for sure. Printed in proto pasta burnt orange metallic copper.
Danke für die Bereitstellung der Datei. Gruss Gerd Alexander
Thank You! printed in KVP orange ABS at .2 layer height. I used supports because the overhangs at the bottom were pretty steep for ABS without any fan. I raised the line width to .6 and it helped a lot with the overhangs
Printed at 70% scale with .2 layers. Turned out really nice, I didn't realize the teeth didn't touch the bed or I could have slowed down the first few layers and saved myself a little touch up work
cool print