Scrubbing Bubbles (filament painting)

The famous Scrubbing Bubbles mascot of SC Johnson created in Hueforge. This was printed on my Bambu Labs P1P with AMS, but can be done on any FDM printer with the provided color swap instructions below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #9 (0.84mm) swap to Lemon Yellow
At layer #11 (1mm) swap to Ice Blue
At layer #18 (1.56mm) swap to Ivory White for the rest.