Vention Wireless Charger Stand - Peak Design Charger Inspired

After printing the stand (which can be printed in one piece or two, depending on the size of the printer), you'll need to print 2x "hinge interior - short" and 2x "hinge interior - long". Insert the "long" part into the inner part of the hinge after printing. Insert the "short" part into the outer part of the hinge, but from the inside, leaving room on the outside for the screw head. After inserting all 4 pieces into the hinge interior, fold the stand and tighten the hinge from both sides using an 18mm long M4 screw.

Print the hinge interior parts using sturdy filament. Personally, I use Prusament PC Blend Carbon Fiber. PLA will not work; the hinge will wear out quickly.

The model is designed for the Vention Magnetic Wireless Charger 15W.