Simple Tablet Car Mount (No hardware)

Everything below is the original information from Thingiverse account https://www.thingiverse.com/leckster27/designs

Just print two and attache to the post of the head rests of your driver or passenger seat to give the second row seat a place to put their tablet while in the car.

Changes from the original

Extended the arm that connects to the head rest to give 60 mm between the end of the hole and where the bend starts (My vehicle has a larger seat and this was causing the arm to angle back more than it should because the original 50 mm wasn't enough to get past the lip of the seat back).

Closed the hole since the existing gap was too small and required taking the head rest off anyway.

1. Added some extra support around the hole since this appeared to be the weakest part of the original design where I saw the most flex.

Print Settings

Printer brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.28

Infill:

20

Filament brand:

Hatchbox

Filament color:

black

Filament material:

PLA