Meowth Multipart

Here is my Moewth model with each piece to print separately
No need for a multicolor printer for this print, you can print each piece separately to assemble them later!!!

You will need 6 colors of filament (beige, gold, brown, white, black, pink) and a little glue for assembly

_________

Personally I printed it in 0.2mm.

Support needed 
An infill of 15-20% is recommended for strength.
There is no need for a raft or edge, a well-adjusted deck is enough.

_________

There are two ready-to-paint versions for Prusa MMU and Bambulab

There is a 3mf version already colored for Bambulab and MMU