HSW Parametric Ring or Circular Bin / Cup using EZ-H Insert

HSW Parametric Ring using EZ-H Insert editable via Fusion 360. You can also close off the bottom to become a cup.
28
161
7
748
updated January 28, 2024

Description

PDF

10.04.2023 EDIT - Changed parameters to include wall thickness and the inside diameter measurement instead of outside. Included the blank insert STL so people can remix.

I utilize one of the best inserts I've tested for the honeycomb storage wall system and created a Fusion 360 parametric model.

You can make the ring what height and diameter you want. Also added the option to have a bottom to the ring to become a cup. The example STL files was used to put my toothpaste and glue stick on the HSW. Ignore the filet error when making the ring higher than the top of the insert.

These are fairly easy to insert, but also are very strong vertically. I find it easiest to push in and pull out horizontally at an angle.

You can also see my other parametric models which use the plug and regular insert (WITHOUT TABS) here.

https://www.printables.com/model/446243-honeycomb-bin-box-parametric-and-optional-two-plug

https://www.printables.com/model/437199-honeycomb-bin-box-parametric-and-optional-plug-or-

 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Used the insert to create a parametric ring / cup for use on a honeycomb storage wall.

License