Sunlu S2 Customizable Parametric Box

SUNLU S2 Filament Dryer Customizable Desiccant Box

This parametric desiccant box is engineered specifically for the SUNLU S2 Filament Dryer. It provides a dedicated space for Silica Gel Beads, enhancing the dryer's efficiency in controlling moisture levels for your filament.

Features:

*Parametric Design: Tailor every aspect of this design within Fusion 360 to meet your specific needs. *Compatibility: Originally designed for the SUNLU S2 Filament Dryer, the parametric design allows for adaptation to other models.

Principal Parameters for Customization in Fusion 360:

*Height: Modify the overall height of the box. *Length: Change the length dimensions to fit your space. *Nozzle Wall: Adjust the wall thickness where the nozzle attaches. *Box Height: Set your preferred internal storage area height. *Spacing Side A & B: Configure the distance between the centers of holes on each side of the box. *Principal Spacing: Update the primary center-to-center hole distance. *OffseLidLip: Tweak the offset of the lid's lip for secure closure. *Diameter Holes Pattern: Designed for 3 mm diameter to snugly fit 3.4 mm Silica Gel Beads. *Height of Lip: Customize the lip height on the lid. *Height Insert & Heat Insert Wall: Define the height and thickness of the inner walls.

Customization:

Navigate to the 'User Parameters' tab in Fusion 360 where you can adjust all the customizable parameters mentioned above.

Conclusion:

This parametric desiccant box serves as an efficient accessory for managing humidity within your SUNLU S2 Filament Dryer. Use Fusion 360 to customize the box to your exact specifications.

it's the same model i did both, but the first one is completely customizable, this one has everything needed for for using on sunlu s2, but it might be a bit more challenging if you want change something.