CR-10S Pro Hot End Cable Keeper (90% parametric)

I made this project inspired by https://www.thingiverse.com/thing:3688550.

but made it from the ground up.

I didn't want a Bowden tube but I did need something to organize my large cables as they were falling into bed.

I used the right one on my project, but I am uploading one with a cable organizer on the center and one with a cable organizer on the left,

it is possible to use medium zip ties, up to 4,70x1.30 mm

do not need any supports just put it by its side.

I am posting my original file on fusion 360, this project is 90% parametric.

I am Brazilian and my language is Portuguese.

if you need to change variables this is the translation

AA = high of aluminium

CA = length of aluminium

LA = Widght of Aluminium

DC = Diameter of Cable

LF = Widght of zip tie

AF = High of zip tie

CD = Handrail of Cable

AI = printer clearance

P = Wall

Printer Clearance(AI) = is at 1.01 or 1%, if you need more tolerance try 1.03 (3%).

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No