MarsOrbiter Dual 5015

I regard this an as archive so there will be no further update, and no support for it 

Here for anyone wanting to give this a spin.
Unlike my newer designs this requires very few screws and no heat inserts.
My current dual 5015 model is the ApolloLander, which has many advantages over the MarsOrbiter, but one thing the MarsOrbiter has is its simplicity.

STEP files included if you want to play with it

No print support needed. (I usually do 0.2mm layer height with a 0.4mm nozzle)
Can be printed in PLA, but overtime the duct could be affected if printing higher temps (reason why my newer designs with swappable ducts), PETG or better is likely a good idea.

Instruction are in a PDF

Supports Orbiter 1.5, Orbiter 2, and Sherpa mini
Files labeled Bltouch also support CRtouch

Phaetus Dragon ST/HF, Rapido (HF only), Dragonfly BMO, Drgaonfly BMS