Ring Pro Doorbell Wedge (15 deg R/10 deg Down)

Customized @themuli's Ring Pro doorbell wedge for my needs. I added a 10 deg downward tilt, moved the screw holes for easier installation, and added some ribs to reinforce the screw holes.

Note that unlike the original, this can only be mounted in one orientation; you'll have to remix your own if you need it to point to the left of the door.

UPDATED: The original version of this was ripped off my front door by a thief. I've redesigned it with significantly more toughness around the screw holes.

Position the infill mask to exactly overlap the model, and use it to set those areas to 100% infill. Exactly how to do this will vary with your slicer.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 5

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Notes:

Printed in HIPS for weather resistance, as this will be used outdoors.

Category: Outdoor & Garden