SKS 11381 ESC-Vario Velo Mountain Rear Fender Replacement Attachment/Plug/Mount

Just a relatively straight-forward replacement part for the rear fender holder/attachement of (among others) SKS Velo Mountain 65 mudguards. My GF does not treat hear MTB with the greatest care and once the original ones snapped, replacement was needed rather quickly. Instead of ordering and waiting for the official parts, I designed a compatible drop-in alternative that you can print yourself in roughly an hour.

https://www.sks-germany.com/en//download/13962/?tmstv=1695830270

Printing:

• Print with 100% infill, hot and slow. You want this part to last.
• Use material that isn't brittle, but somewhat compliant. PETG and ASA would be good choices. 
• Angle the parts on the build-plate s.t. layer lines are not aligned with the geometry. 45° rotation in Y would be a good choice.

Assembly:

• You will need a M4x8 screw and M4 nut to clamp this to the stay. Both are included in the original, but you can use replacements (stainless highly recommended).
• You will most likely need a M5 screw to attach this to your frame. Length depends on the frame, but M5x8 at least. Obviously should also be available when having the original clamps installed.