Ring Outdoor Gate Contact Sensor Riser

This raises the contact sensor so when its on a gate, garage or shed door that isn't level and both magnets join, you can adjust the dimensions in a slicer to make it thinner or thicker, wider or narrower, longer or shorter, they are made by ring.com as an adapter / accessory and where available before covid19 but not been in stock for a long time, so feel free to print your own, also compatible with indoor contact sensors too for windows and doors. (If you don't want to attach it by screws use double sided tape) p.s double sided tape burglars can pull the sensor off to not set the alarm off

For printing print it from ABS or PLA with 50% infill.

Always Print in matching colour filament  Black = dark coloured door or fence | White = cream or white fences or door frames this will camouflage it from burglars vandalising it. 

It has a 10mm thickness when downloaded.

The picture is how they print on your build plate, you must print on a raft to keep flat and prevent them moving as the holes for mounting will not be straight if not printed this way.