BentoBox Base with switch cutouts and wire management

Added switch cutouts for the switch I purchased from AliExpress, added two pass through holes for wires, and made a cutout in the back to have space for wiring. I should have purchased a 3-positition switch, but used 2 switches to allow for turning on all the time, or using a thermo-switch (35 C).

Here's the tinkercad I used if you'd like to edit for your application: https://www.tinkercad.com/things/icNQh55cqvr/edit

I'd make the cutout deeper (used 3.5 mm, could be 4.5-5 mm) and slightly wider pass throughs (used 5, could be 6 mm).

Enjoy

Added 1 or 2 switch cutouts, 2x wire pass through, and an area to manage the wiring