Qube 500 Extendable Arm Fan

Do you ever feel the need for a little extra cooling on those hot sweaty game nights? Maybe you’re pushing your processor a bit too hard for your fans to handle? Do you have a 120mm or 80mm fan just collecting dust in the corner after an upgrade? Here is your solution! The extendable arm fan to cool you or your PC off. All the extra material that you will need will be…

1 x 120mm/80mm Pc fan

https://www.amazon.ca/dp/B002YFSHPY?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.ca/dp/B002YFP8BK?psc=1&ref=ppx_yo2ov_dt_b_product_details

1 x 12v power supply      https://www.amazon.ca/gp/product/B01GD4ZQRS/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&th=1

1 x rocker switch (optional)

https://www.amazon.ca/dp/B07Y1GDRQG?ref=ppx_yo2ov_dt_b_product_details&th=1

4 x M5 20mm bolts and nuts

https://www.amazon.ca/dp/B01J9865L6?psc=1&ref=ppx_yo2ov_dt_b_product_details

Print Instructions:

Everything prints just fine flat on the print bed. Part 5 and 6 need supports on the male connector tip and part 2 I printed with a 2mm brim so they stayed on the print bed. Part 2 is the only thing you may need to trouble shoot due to your printer. Currently it’s just a 4.9mm wide cylinder at 9mm height. Alternatively, you can just superglue the parts that require the dowel together.

You can remove the yellow data cable from your fan before getting it into the holder. If you do want to attach an on off switch you just need to solder the hot end to one side and an extra hot cable soldered off the other side then hook it up to the 12v power supply.  It can also be wired up with a USB cord but the fan output is underwhelming.

Remixed the Honeycomb pattern into the breathable back of the fan holder.

Remixed the male and female connectors from the USB powered fan

Remixed the small cable clip into the moveable arms and the extra cable organizer