Way better than the original and the single tube remix
Sovol SV06 Plus Ultimate Filament Runout Sensor Housing (Dual PTFE)
Add a smooth, low-resistance path for your filament to travel through the runout sensor.
43
209
5
1566
updated January 21, 2024
Makes
Comments
@Chinchill So glad you like it! Thanks for your comment.
Printed in clear petg. Works great, can be a bit tricky to get filament through it Sometime
View 2 more comments
@GT_Reaper Good info. I haven’t used ASA yet so had no idea. I’ll definitely add that, then.
@PhantomAura_1179965 glad I could help! 😃
Filament carved a channel in the bottom of the previous sensor housing which was deep enough to create slack and trigger false alarms. This models inclusion of PTFE tube segments in the bottom and inside the top should alleviate the problem. Absolutely fantastic!
@Mercy_1459287 So glad you like it! Thanks for posting your make.
@DS3003_887295 You’re welcome! Thank you for posting your make.
This worked really well. Good design.
@Hulign_444387 Thanks for the feedback! Glad it’s working for you.
This is definitely what my SV06+ needed, a smoother path for the filament.
Printed in Black Inland PETG at 0.2mm layer height, on the SPEED preset with the prusa mini insput shaper alpha!
Thanks for the great model!
@Shmidtey Glad it helped you out! Thanks for posting your make.