DSQ-1 – KORG SQ-1 SEQUENCER EURORACK MOUNTING FRAME

The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. The frame can be also ordered at https://www.spillerphoto.com

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

Easy assembly

Remove the batteries
Loosen the thin plastic film on one side which is holding the battery holder in place
Unscrew the 4 front screws
Remove the back and pull the battery holder through the back, that the back can be put aside
Slide the mounting frame in
Use the 4 screws from the front to fix the mounting frame

Print Settings

Printer Brand:

Prusa

Printer:

Doesn't Matter

Supports:

0,2

Infill: