Cat Tree - 1:12 Scale Dollhouse Size

Decorate your dollhouse with this 1:12 scale model of a cat tree. With room for up to 5 tiny cats, the uprights are textured to give the appearance of rope-wrapped scratching posts. This affect can be enhanced with a paint wash, or leave as is.

Printing and assembly:

The pieces print separately in one file requiring very little support. Be sure to use at least 3 walls. Otherwise, the uprights will become weak from the rope-wrapping effect. 

I used Cura slicer and printed at 30% gyroid infill with 4 walls at .16 layer height (dynamic quality setting) with concentric top/bottom layers. I used tree supports to support the holes and maintain their dimensional accuracy.

Simply glue the pieces together using your preferred gluing method (I used some CA glue (aka super glue), and enjoy!

If you enjoy this model, and feel generous, click here to Buy Me a Coffee.

Thank you, and happy decorating!!