17mm RC Hex Wrench

This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for my usage with serrated nuts, so I don't crank down the torque to extremes. Obviously this is not as strong as a metal wrench or fiber-reinforced plastic, but I’ve had no nuts come loose or off in my use. If you tend to overtighten wheel nuts this might just be a good spare to have in your pit box instead of a primary.

Print Instructions

Printed in PETG, 0.2mm layer, 20% rectilinear infill, 3 perimeters, no support needed