HueForge Astronaut

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ eSun  Black 
PLA+ Sunlu Blue 
PLA+ Sunlu Red 
PLA+ eSun Yellow 
PLA+ Sunlu White

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #14 (1.2mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.