Honestly very frustrating.
The model scale was way out so had to guess how big to make it.
The bottom edge was not flat so had to shave a couple mm off it so it can sit on the bed.
The model was broken near the base of the big jewel - there’s an issue with the mesh causing some weird fuzz that confused the slicer and printer.
And after all that it’s unfortunately shaped in a way that it can’t really be used as a headband - it just pops off due to the slope.
@DrKriegerAUS could you clarify what you mean by popping off due to the slope? Asoka's head isn't exactly human-shaped cuz of her head tails, so I tried to find a decent in between that still looked like what she wears. My slicing program didn't take up issue, but all I had to do was color then print as one piece.
@ChaseRoberts_822981 I mean that the angled sides pull the whole thing away from the wearers head. If, when sitting on the bed, the sides were closer to vertical as the headband clamps down it wouldn’t slide forward as much.
