Nebraska "N" Shaped Cribbage Board

This Cribbage board is designed for multicolor printers.  

I print the base in Red.

The veneer is the only multicolored print.  I print it separately so that I can inspect the quality before gluing it to the base. I apply superglue along the rim and along the tracks.  Be careful to not apply the glue too close to the the edges to minimize oozing.  Superglue will mare the surface of PLA.  I like to use gel type superglue to give me a little more time to adjust the veneer.  I use several pegs to align the veneer to the base.  Be sure not to get glue too close to the holes or you might have a problem getting the pegs out!

I use PLA but other types will certainly work.  4 colors are needed; red, white, black and grey.

You will need to print the Pegs.3mf project 3 times, once for each color of red, white and black.  The board only need 3 pegs of each color but I put 4 in the design as a spare.

The board will hold a standard “Bicycle” brand of cards as well as some of the popular Nebraska themed pack of cards.

The Cribbage Instructions pdf file contains the instructions twice.  I print this document out as double sided and then cut it down to fit inside the Cribbage board after folding it in fourths.