Extras - Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)

Modified model files from following project:

https://www.prusaprinters.org/prints/22008-double-stack-ikea-lack-enclosure-v2-works-w-mmu2s

In his instructions, For top corners it is instructed to drill the hole of the corner pieces as they are too small. So I adjusted me model to fit the screws with no need of a drill. Also wanted to have all 4 back corners to have a hole to customize my cable management further, so I added a corner piece with the hole for the opposite side.

I also found the enclosure to be more sturdy mounting the bottom corners with the same large 2-way Screws provided with the Lack tables as are instructed for the top corners.

*These are only extra pieces for Mordiev's project, Please go to his print for all files and instructions*