CooliPi 4B VESA 100x100mm

A snap-on VESA 100x100mm holder for the CooliPi 4B CASE.

A CooliPi 4B CASE holder with cable management for the Raspberry Pi 4 model B computer.
See more info at www.coolipi.com
Shop at www.sensoreq.com

Print instructions

This is a VESA 100x100mm holder for a Raspberry Pi model B case named CooliPi 4B CASE, for use with a real aluminium heatsink sold by www.sensoreq.com

CLIPS retain the case in place.
V-shaped supports hold cables (USB-C, HDMI, TRRS 3.5 jack).

If you have a Prusa i3 MK3/S, 0.4mm nozzle diameter, you can use the gcode directly. Print material PETG. Not tested with other materials. The case was exported with 15% fill, CLIPS were with 100% fill.

You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different.

The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours, but it's not critical.

In other words, gcode has the 0.3% increase in it.
The 3mf project has the 0.3% increase set for this part.
Source STL files are in nominal dimensions.

Print orientation is visible on the pictures. No supports needed.

This is to be used only with a CooliPi 4B aluminium heatsink from www.sensoreq.com, and a cooler case CooliPi 4B. You can print a mockup of the heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name.

The case is in a collection under CooliPi 4B CASE name.

The HAT frame and a FAN frame are also in a different set in the collection.

See more at www.coolipi.com . Source files are in Download section in the menu.