Magnetic 58mm Portafilter Funnel (Gaggia Classic, E61, ECM, Lelit, Bezzera)

I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has 72.8mm and wider lugs. My 58mm tamper fits right trough the funnel if you want to tamp with the funnel on the portafilter.

I used pretty standard 10x2.7mm Magnets (5pcs) so the funnel stays in place. There also is a press-fit version if you don't want to use magnets. 
The Print i uploaded was made with 6 wall perimeters but you can use pretty much any Filament/Settings i think. Printed in DasFilament PLA.

Have fun printing & drinking espresso without any coffee grind spill. 

P.S. I have provided .step .f3d for easy editing/remixing.

Update 20.12.2024:
Added a model for the E61 folks out there :) It is 72.8mm wide and lugs are now 28mm for this variant.