CooliPi 4B CASE

Cooler case for a Raspberry Pi 4 model B. To be used only with an anodised aluminium heatsink sold by www.sensoreq.com.

You can print a CooliPi 4B heatsink MOCKUP of the heatsink and evaluate the sheer size and aesthetic of the set. It's in the Coolipi 4B collection.
See more info at www.coolipi.com
Shop at www.sensoreq.com

Print instructions

This is a Raspberry Pi model B case named CooliPi 4B CASE, for use with a real aluminium heatsink sold by www.sensoreq.com

The VESA 100x100mm stand under the case is in another set, see our collection.

If you have Prusa i3 MK3/S, 0.4mm nozzle diameter, you can use the gcode directly. Print material PETG. Not tested with other materials. The case was exported with 15% fill, covers were with 100% fill.

You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different.

The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours. If you print it a bit bigger, no problem. The real aluminium heatsink has 87x66mm base, it must fit into a 87.4x66.4mm frame cutout in the case. 0.4mm is reserved in each direction, but try to print with the closest scale possible. 0.3% was ok for PETG for us.

In other words, gcode has the 0.3% increase in it.
The 3mf project has the 0.3% increase set for this part.
Source STL files are in nominal dimensions.

Print orientation is visible on the pictures. No supports needed.

This is to be used only with a CooliPi 4B aluminium heatsink from www.sensoreq.com, or you can print a mockup of that heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name.

The VESA 100x100mm base can be printed, but is in another set in the CooliPi 4B collection.

The HAT frame and a FAN frame are also in a different set in the collection.

See more at www.coolipi.com . Source files are in Download section in the menu.

Don't forget to show it to your friends!