Land Rover series 3
Description
PDFTrack width 313 mm, scaled 1:10
EDIT ... 20.11.2020
A place for hinges has been added to the file "back door".
Side sill panels have been added.
EDIT ... 30.11.2020
Front panel correction and front fender.
Snorkel added for self-gluing and assembly. The elements must be well placed on the printer table.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
25% - 30%
Filament: Print me HT PLA Black
Notes:
A mix like that of a very cool Land Rover 2 series project.
Land Rover Series 3 body. Track width 313 mm.
I built mine on Injor's chassis. Chassis maple from Axial SCX10 II.
Make a mirror image of all parts such as fenders, doors or side mirrors in the slider to have left and right.
Mirrors, steering wheels and hinges are printed at a resolution of 0.12 mm best.
To attach the roof rack you need M2.5 screws, 22 mm long, cylindrical for an Allen key.
To close the hood you need 2 neodymium magnet 6 x 3 mm.
Reflectors adapted to 20 mm LED collimators.
Hinge pivots for doors and side mirrors are 2mm rod.
The photos are my Camel Trophy crawler. It's not finished yet but I'm working on it intensively all the time.
Some history of bulding my Land Rover link http://www.rc-trial.pl/viewtopic.php?f=23&t=17719
EDIT 20.11.2020
EDIT ... 20.11.2020
A place for hinges has been added to the file "back door".
Side sill panels have been added.
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
Differences of the remix compared to the original
Change of model length from 275 mm to 313 mm. Changing the body from a Land Rover Series 2 to a Series 3