Macropad Dock

Macropad two part dock.  The holder friction fits in the base (it was a smidge loose for me because I over trimmed the support material)

Printed with a 0.4mm nozzle at 0.2mm layer height.  The base should be printed with the main opening facing the print bed to minimise support material needed and overall print time.  A deburr too should be used to clean up the print edges that require it prior to fitting together.

I've included two versions of the base should anyone want to mount the macropad to the streamdeck plus [https://www.printables.com/model/588891/] like I have in the cover picture.

The main holder for the macropad should be laid flat in your slicer prior to printing.

I bought 90degree USB connectors to allow the fitting of a standard USB cable https://www.amazon.co.uk/dp/B0BNMCMYNF

If you have any issues or questions then feel free to DM/comment and I'll do my best to help.  I'm also on twitter with the same handle as Printables.