#0098 Latching Poker Playing Card Hard Case

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!

**********

A locking box to stow and protect your poker deck.  Easy to print without supports.

Sized for Bicycle Branded “Standard” deck size.

Inside dimensions: 64.5mm x 89.4 mm x 16.8 mm

2 Variants are published here:

1. Cap with tighter clearances (0.2mm total) - for well-tuned printers and/or printers with input shaper running.
2. Cap with larger clearances (0.3mm total) - for printers that need more clearances for whatever reason. 

This was tested with Polymaker and CC3D PLA printed by a MK3S+ printer. without input shaper and by a MK4 printer with input shaper running.

Recommendations:

1. 0.2mm layers, 0.4mm nozzle
2. Use PLA or PETG
3. Use “aligned” seams which will put the seams at the corners - Do not use random seams.

*** IMPORTANT NOTE ***

For the best protection for your precious cards, best NOT to print with anything that has carbon fiber (CF) in it, because CF is abrasive and will scratch/damage your deck over time and usage.

Input shaper helps remove ringing (ghosting) that usually produces inaccuracies in your print (as well as having undesirable cosmetic effects.)  Therefore it can handle models with tighter tolerances - albeit assuming that your printer is well calibrated!

Instructions to Open:  Squeeze together on the raised circles on the box and the lid (at the same time) to unlatch the lid from the box. Then pull open.  

Note: it latch works better with cards already inside the box.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!