HueForge Pikachu with Santa Hat [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #30 (2.48mm) swap to Dark Red
At layer #35 (2.88mm) swap to Lemon Yellow
At layer #55 (4.48mm) swap to White for the rest.