HueForge Blastoise [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Pro Light Blue Transmission Distance: 1
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA PolyLite Starlight Mercury Transmission Distance: 2.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Light Blue
At layer #31 (2.56mm) swap to Earth Brown
At layer #37 (3.04mm) swap to Lemon Yellow
At layer #48 (3.92mm) swap to Starlight Mercury
At layer #69 (5.6mm) swap to White for the rest.