HueForge Mario Leaning on a Block [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Blue Transmission Distance: 1
PLA PolyLite Azure Blue Transmission Distance: 3
PLA Eryone Matte Navy Blue Transmission Distance: 0.7
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA Protopasta Bottle Brown Transmission Distance: 15
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #26 (2.16mm) swap to Blue
At layer #30 (2.48mm) swap to Azure Blue
At layer #32 (2.64mm) swap to Navy Blue
At layer #33 (2.72mm) swap to Arctic Teal
At layer #38 (3.12mm) swap to Bottle Brown
At layer #39 (3.2mm) swap to Wine Red
At layer #49 (4mm) swap to Army Brown
At layer #50 (4.08mm) swap to Pastel Peach
At layer #60 (4.88mm) swap to White for the rest.