HueForge Yoshi Tongue Shoot

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Magenta Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Kexcelled Fluorescent Green Transmission Distance: 4.6
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Wine Red
At layer #33 (2.72mm) swap to Magenta
At layer #35 (2.88mm) swap to Sunrise Orange
At layer #42 (3.44mm) swap to Fluorescent Green
At layer #65 (5.28mm) swap to White for the rest.