Angle Grinder Key - Parametric
Angle Grinder Key (short, long and parametric)
30x4mm (centre to centre distance and diameter)
2 M4 screws needed.
39
157
2
550
updated
June 4, 2024
Description
PDFThe model needs two screws M4. I've used 20 mm long screws. Better longer screws than shorter, if the centre to centre is 28 mm with longer screws you can adjust the tool.
I've uploaded a parametric version for Freecad. Every dimension of the model can be changed.
Tags
Model origin
The author marked this model as their own original creation.