HueForge Princess Peach

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA Kexcelled Fluorescent Red Transmission Distance: 4.5
PLA PolyLite Pink Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Aqua Blue
At layer #30 (2.48mm) swap to Fluorescent Red
At layer #43 (3.52mm) swap to Pink
At layer #44 (3.6mm) swap to White
At layer #48 (3.92mm) swap to Pastel Peach
At layer #48 (3.92mm) swap to Savannah Yellow
At layer #50 (4.08mm) swap to White for the rest.