HueForge circular portrait of Mario

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyTerra Lime Green Transmission Distance: 1.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Azure Blue
At layer #22 (1.84mm) swap to Sky Blue
At layer #31 (2.56mm) swap to Wine Red
At layer #39 (3.2mm) swap to Brown
At layer #41 (3.36mm) swap to Pastel Peach
At layer #51 (4.16mm) swap to Lime Green
At layer #52 (4.24mm) swap to White for the rest.