HueForge 8 Bit Mario

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5

Swap Instructions:
Start with Azure Blue
At layer #21 (1.76mm) swap to Black
At layer #23 (1.92mm) swap to Wine Red
At layer #41 (3.36mm) swap to Army Brown
At layer #42 (3.44mm) swap to Pastel Peach
At layer #49 (4mm) swap to White
At layer #50 (4.08mm) swap to Savannah Yellow for the rest.