EASY 13 / MINI 13: Openable Backpack (remix)

This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone, which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13”, for whom this backpack was originally designed by Alioth.

• PRINTING:
  
  PLA/PETG/ABS will all work, I do suggest PETG or ABS for durability. No Brim, but do enable Support for the connector pin. While I recommend printing with a 0,2mm Nozzle at 0,10mm layer height for optimal looks, a 0,4mm nozzle at 0,2mm layer height will definitely work as well.

I remixed Alioth's “Openable Backpack” originally intended for the “LUCKY 13” with Bruno Vinicius's "Mini 13: Wings" to create create a Backpack that fits both the "EASY 13" and "MINI 13" poseable jointed figures by soofazone, which have a rectangular slot on the backside of the chest piece.